Γαλιώτης Κώστας

1982: PhD in Materials Science, Dept. of Materials, QMW-Univ. of London, UK
1977: Diploma in Chemistry, Univ. of Athens, Greece

Graphene and Carbon Nanotubes: Mechanical properties in tension and compression. Surface modification and structural characterisation. Production of nanocomposites.
Composites: Stress/ strain sensing. Interfacial measurements. Micromechanics of reinforcement. Strain mapping. Modes of Failure. Mechanical characterisation. Smart Structures.
Polymers: Modelling structure/ property behaviour in semi-crystalline polymers. Morphological and structural characterisation of moulded polymers. Spectroscopic characterisation of polymers.
Non-Destructive Testing of Materials: World leader in the application of Laser Raman spectroscopy for stress or strain measurements in fibres and composites. Application to both polymeric and ceramic based composites.

2014 – current : Professor, Chemical Engineering Dept., Univ. of Patras
2002 – 2014 : Professor, Materials Dept., Univ. of Patras
2007 – 2013: Director of FORTH/ICE-HT
1996-2002: Research Director, FORTH/ICE-HT
1993-1996: Reader, Dept. of Materials Sci., Queen Mary College University of London, UK
1987-1993: Lecturer, Dept. of Materials Sci.,Queen Mary College University of London, UK
1986 : Lecturer, Dept. of Materials Sci., Brunel Univ., UK
1981-1986: Research Fellow, Queen Mary College University of London, UK

• Elected member of the Academy of Europe, (Academia Europaea) (2021).
• Fellowship of the Institute of Materials, Minerals and Mining (IOM3) (2020).
• Award from Bodossakis Foundation for innovative project/ patent application (2019).
• The Aristeion of Academy of Athens in the Natural Sciences for the year 2019 (it is the annual top prize for a specific discipline).
• Fellowship of the European Academy of Sciences (EuRASc) (2019).
• Elected member of the Scientific Council of Greek Foundation for Research and Innovation (ELIDEK) (2017-Current).
• Elected Member of the Graphene Flagship Executive Board of (2016-current).
• “Pericles Theocaris” Award – Academy of Athens (December 2015), for the scientific publication “Curvature dependent surface energy for a free standing monolayer graphene: Some closed form solutions of the non-linear theory” (D. Sfyris, G. I. Sfyris and C. Galiotis, International Journal of Non-Linear Mechanics, 67:186-197, 2014).
• Appointment as a National Representative for Greece in the Horizon 2020 Programme Committee of Nanotechnology, Materials, Processes and Biotechnology (2011-2018).
• Appointment in the FP7 Programme Committee as a National Representative of Nanotechnology, Materials and Processes (FP7-NMP) for Greece (2011-2013).
• National Representative in the Graphene FET Flagship (since 2012).
• Award of The John S. Latsis Public Benefit Foundation for the project “Mechanical behaviour of two-dimensional crystals: The case of graphene” (2010).
• Elected Member of the Executive Council of the European Association of Composite Materials (1999-2012).
• Member of the Board of Directors of Nanofun-Poly Network of Excellence (2004-2008).
• Elected President of the European Association of Composite Materials (2004-2006).
• Institute of Materials top prizes for research papers (1990,’91,’93).
• British Government Scholarship (1978-91).
• Du Pont Young Faculty Award (1989-90).
• Second Prize of Greek Mathematical Society (1972).

Extensive experience with the management of research projects and main co-ordinator/ partner of over 50 research programmes (funded by CEC, national bodies and industry) of total value of over 100 M?. To date he has handled almost 18 M? for work related to the activities of his own group. Coordinator of an ERC-Advanced Program (2013-2018) and of an ERC-PoC (2017-2019). Leader of WP14- Composites of the Graphene Flagship (the largest ever research program of EU funded by 1 billion Euro, 2013-2023). Has coordinated in the past large research programmes funded by FP7, ERC (GSRT) and other sources. From 2004-2008 he participated as a core partner in the European Network of Excellence (NoE) in Nanostructured Polymers and Nanocomposites. He coordinated (2006-10) a Marie Curie – Transfer of knowledge (TOK) grant for research in high volume fraction in carbon nanotube polymer composites. Funding agencies include CEC (FP5, FP6, FP7, Horizon 20202), EPSRC (UK), DRA (UK), ROYAL SOCIETY (UK), ONR (USA), GSRT (GR) etc.

418 publications in total: 9 chapters in books, 5 refereed reviews, 3 patents, 225 refereed journal papers, 74 refereed books of proceedings, 102 in non-refereed conference proceedings, (see bibliographic diagram from Web of Science).

Presentation in 147 international and national conferences. Invited speaker at 52 international conferences.

2017, Chairman and Organiser of the Graphene Week (Athens, Greece)
2015, Chairman and Organiser of the Summer School 2015(Patras, Greece) on New Carbon Fibres- 100 participants
2014, Chairman and Organiser of the Graphene Summer School 2014 (Patras, Greece)- 100 participants
2014, Chairman and Organiser of a Workshop on Graphene-based Composites in ECCM16, Seville, Spain (June 22-26)
2014, Chairman and Co-organiser (with Prof. Chryssolouris) of the Intenational Industrial Technologies 2014 Conference (Athens, Greece)- 1300 participants
2013, Co-organiser (with Prof. Anastasiadis) of the Onassis Lectures Series in Physics and Chemistry(theme: Nanosciences and Nanotechnology), July 15-19 2013, Heraklion
2012, Chairman and Organiser of the International GrapHEL conference (Mykonos, Greece)- 150 participants
2007, Chairman and Organiser of the International NANOCONF’07 conference (Corfu, Greece)- 150 participants
2004, Chairman and Organiser of ECCM11 (Rhodes, Greece)- 650 Participants
1997, Chairman of workshop on Composite Materials at JRC, ISPRA, Italy- 30 participants
1993, Chairman Composite Interfaces workshop (funded by ONR, USA) and held in London- 30 participants

Committee of Horizon 2020 and FP7 (2011-2018) of the Commission of European Communities. National Representative in the Graphene Flagship (2013-2023). Founder and Head of the FORTH Graphene Centre (the only Graphene Centre in Greece). Member of the European Research Council (ERC) PE8 panel for Engineering (since 2014). Served as Expert, Reviewer, and Independent Observer for evaluation of European FP5, FP6, FP7 and Horizon 2020 research proposals. Served as a Vice-Chair of Marie-Curie evaluations in the whole of FP7 and Horizon 2020 (2014). External Reviewer of the European Commission Joint Research Centre (JRC) at ISPRA, Italy (2000-2003). Reviewer for the Fulbright Foundation, USA, (1992-current). Reviewing applications for promotion to tenured faculty positions for US universities (Cornell, GIT, RPI). UK representative and coordinator of the university-industrial liaison for the European Concerted Action on Composite Interfaces (1992-97). Official External Examiner/ Reviewer for the MSc course on Advanced Materials in the Department of Materials of University of Surrey, UK (1995-97). External Examiner of PhD programmes for 4 UK universities (London, Manchester, Sheffield, Surrey), 1 German (Kaiserlautern) and 2 Greek universities (Athens-Technical and Patras) (1990-current). Member of the Academic Board of Queen Mary Univ. of London (1993-95).

Undergraduate:
Chemical Engineering Dept. – Univ. of Patras: Mechanics of Materials
Chemical Engineering Dept. – Univ. of Patras: Nanomaterials and Nanotechnology

Graduate:
Programme on Polymers- Univ. of Patras: Physics of Polymers

Editor-in-Chief of the Journal “Graphene and 2D Materials Technologies” (Springer-Nature, since 2017).
Editor-in-Chief of “Advanced Composites Letters” (1993-2018, recently acquired by SAGE publishing). International fully cited journal on Composite Materials. Published refereed short Letters and Full Papers.
Editor-in-Chief of the Journal of “Nanostructured Polymers and Nanocomposites” (2005-2014). The journal was publishing research papers every three months (publishers: ECNP, Italy) and was indexed by Scopus.
Editorial Board Member of the journals “Scientific Reports” (Springer-Nature) , “International Materials Reviews” and “Applied Sciences”.

• “Effective EMI shielding behaviour of thin graphene/PMMA nanolaminates in the THz range”, by, Christos Pavlou, Maria Giovanna Pastore Carbone, Anastasios C. Manikas, George Trakakis, Can Koral, Gianpaolo Papari, Antonello Andreone and Costas Galiotis, Nature Communications, 12, Article Number: 4655, 02 August 2021.
• “Preventing colour fading in artworks with graphene veils”, by, Maria Kotsidi, George Gorgolis, Maria Giovanna Pastore Carbone, George Anagnostopoulos, George Paterakis, Giovanna Poggi, Anastasios Manikas, George Trakakis, Pierro Baglioni and Costas Galiotis, Nature nanotechnology, 01 July 2021.
• “Real-Time Multiscale Monitoring and Tailoring of Graphene Growth on Liquid Copper”, by, Maciej Jankowski, Mehdi Saedi, Francesco La Porta, Anastasios C. Manikas, Christos Tsakonas, Juan S. Cingolani, Mie Andersen, Marc de Voogd, Gertjan J. C. van Baarle, Karsten Reuter, Costas Galiotis, Gilles Renaud, Oleg V. Konovalov, and Irene M. N. Groot, ACS nano, 15, 9638?9648, June 1 2021.
• “Tunable macroscale structural superlubricity in two-layer graphene via strain engineering”, by, Androulidakis, Charalampos, Koukaras Emmanuel N., Paterakis George, Trakakis George and Galiotis Costas, Nature Communications, 11, Issue: 1, Article Number: 1595, March 2020.
• Mosaic pattern formation in exfoliated graphene by mechanical deformation, by, Maria Giovanna Pastore Carbone, Anastasios Manikas, Ioanna Souli, Christos Pavlou, and Costas Galiotis, Nature Communications, 10, Article Number: 1572, April 2019.
• “Failure Processes in Embedded Monolayer Graphene under Axial Compression” by Ch. Androulidakis, E.N. Koukaras, O. Frank, G. Tsoukleri, D. Sfyris, J. Parthenios, N. Pugno, K. Papagelis, K.S. Novoselov, C. Galiotis, SCIENTIFIC REPORTS (Nature), 4, 5271 (2014).
• “Development of a universal stress sensor for graphene and carbon fibres” by O. Frank, G. Tsoukleri, I. Riaz, K.Papagelis, J. Parthenios, A.C. Ferrari, A.K. Geim, K. S. Novoselov, C. Galiotis, Nature Comms, 2/255, 2011.
• “Subjecting a Graphene Monolayer to Tension and Compression” by G. Tsoukleri, J. Parthenios, K. Papagelis, R. Jalil, A.C. Ferrari, A.K. Geim, K.S. Novoselov, and C. Galiotis, Small, 2397-240: 25/21, 2009.
• “Chemical Oxidation of Multi Walled Carbon Nanotubes” by V. Datsyuk, M. Kalyva, K. Papagelis, J. Parthenios, D. Tasis, A. Siokou, I. Kallitsis and C. Galiotis, Carbon, 833-840: 46/6, 2008.
• “Stress generation by shape memory alloy wires embedded in polymer composites” by D. Bollas, P. Pappas, J. Parthenios and C. Galiotis, Acta materialia, 5489-5499: 55/16, 2007.
• “Effect of Stress and Temperature on the Optical Phonons of Aramid Fibers” by D. Bollas, J. Parthenios and C. Galiotis, Physical Review B, 73, 094103, 2006
• “An experimental and theoretical study of the stress transfer problem in fibrous composites”, by G. Anagnostopoulos, J. Parthenios, A.G. Andreopoulos and C. Galiotis, Acta Materialia, 4173-4183: 53/15, 2005.

• “Double cantilever beam test and micro-computed tomography as evaluation tools for self-healing of CFRPs loaded with DCPD microcapsules “, by Kontiza, A., Semitekolos, D., Milickovic, T.K., Pappas, P., Koutroumanis, N., Galiotis, C., Charitidis, C.A., Composite Structures , 211:art. no. 114780 (2022)
• “Nacre-like GNP/Epoxy composites: Reinforcement efficiency vis-`a-vis graphene content “, by Cilento, F., Martone, A., Pastore Carbone, M.G., Galiotis, C., Giordano, M., Composites Science And Technology, 211:art. no. 108873 (2021)
• “Multi-functional 2D hybrid aerogels for gas absorption applications“, by Androulidakis, C., Kotsidi, M., Gorgolis, G., Pavlou, C., Sygellou, L., Paterakis, G., Koutroumanis, N., Galiotis, C., Scientific Reports, 11:art. no. 13548 (2021)
• “Shape memory composite sandwich structures with self-healing properties“, by Quadrini, F., Bellisario, D., Iorio, L., Santo, L., Pappas, P., Koutroumanis, N., Anagnostopoulos, G., Galiotis, C., Polymers, 13(18):art. no. 3056 (2021)
• “Effective EMI shielding behaviour of thin graphene/PMMA nanolaminates in the THz range“, by Pavlou, C., Pastore Carbone, M.G., Manikas, A.C. (….) Galiotis, C., Nature Communications, 12(1):art. no. 4655 (2021)
• “Preventing colour fading in artworks with graphene veils“, by Kotsidi, M., Gorgolis, G., Pastore Carbone, M.G., Anagnostopoulos, G., Paterakis, G., Poggi, G., Manikas, A., Trakakis, G., Baglioni. P., Galiotis, C., Nature Nanotechnology, 16: 1004-1010 (2021)
• “Real-Time Multiscale Monitoring and Tailoring of Graphene Growth on Liquid Copper“, by Jankowski, M., Saedi, M., La Porta, F., Manikas, A.C., Tsakonas, C., Cingolani, J.S., Andersen, M., de Voogd, M., van Baarle, G.J.C., Reuter, K., Galiotis, C., Renaud, G., Konovalov, O.V., Groot, I.M.N., ACS Nano, 15(6): 9638-9648 (2021)
• “In situ kinetic studies of CVD graphene growth by reflection spectroscopy“, by Tsakonas, C., Manikas, A.C., Andersen, M., Dimitropoulos, M., Reuter, K., Galiotis, C., Chemical Engineering Journal, 421: art. no. 129434 (2021)
• “Determination of the elastic moduli of CVD graphene by probing graphene/polymer Bragg stacks“, by Liu, B.H., Pavlou, C., Wang, Z.Y., Cang, Y., Galiotis, C., Fytas, G., 2D Materials, 8(3): art. No. 035040 (2021)
• “Highly Deformable, Ultrathin Large-Area Poly(methyl methacrylate) Films“, by Pantano, M.F., Pavlou, C., Carbone, M.G.P., Galiotis, C., Pugno, N.M., Speranza, G., ACS OMEGA, 6(12):8308-8312 (2021)
• “Growth and in situ characterization of 2D materials by chemical vapour deposition on liquid metal catalysts: a review“, Tsakonas, C., Dimitropoulos, M., Manikas, A.C., Galiotis, C. , Nanoscale, 13(6):3346-3373 (2021)
• “Multifunctional Cement Mortars Enhanced with Graphene Nanoplatelets and Carbon Nanotubes“, by Dalla, P.T., Tragazikis, I.K., Trakakis, G., Galiotis, C., Dassios, K.G., Matikas, T.E., SENSORS, 21(3):933 (2021)
• “Efficient Mechanical Stress Transfer in Multilayer Graphene with a Ladder-like Architecture“, Sgouros, A.P., Androulidakis, C., Tsoukleri, G., Kalosakas, G., Delikoukos, N., Signetti, S., Pugno, N.M., Parthenios, J., Galiotis, C., Papagelis, K., ACS Applied Materials & Interfaces, 13(3):4473-4484 (2021)
• “Impact of prolonged environmental exposure on stress transfer efficiency in poly(p-phenylene terephthalamide)/epoxy composites“, Anagnostopoulos, G., Koukaras, E.N., Parthenios, J., Galiotis, C.
  Polymer Composites, 42(4):1901-1911 (2021)
• “Thermomechanical behaviour of hexagonal boron nitride at elevated temperatures“, by Androulidakis C., Galiotis C., 2D Materials, 7(4):art. no. 045011 (2020).
• “Hierarchy of nanoscale graphene wrinkles on compliant substrate: Theory and experiment“, by Androulidakis C., Koukaras E.N., Sampathkumar K., Rahova J., Galiotis C., Frank O., Extreme Mechanics Letters, 40:art.no.100948 (2020).
• “Thermomechanical response of supported hexagonal boron nitride sheets of various thicknesses“, by Seremetis L., Koukaras E.N., Alexandri S., Michail A., Kalosakas G., Parthenios J., Galiotis C., Tsirkas S., Grammatikopoulos S., Papagelis K., Journal of Physical Chemistry C, 124(22):12134-12143 (2020).
• “Porous carbon nanotube networks and pillared graphene materials exhibiting high SF6 adsorption uptake and separation selectivity of SF6/N2 fluid mixtures: A comparative molecular simulation study“, by Skarmoutsos I., Koukaras E.N., Galiotis C., Froudakis G.E., Klontzas E., Microporous and Mesoporous Materials, 307:art. no. 110464 (2020).
• “Mechanical, electrical, and thermal properties of carbon nanotube buckypapers/epoxy nanocomposites produced by oxidized and epoxidized nanotubes“, by Trakakis G., Tomara G., Datsyuk V., Sygellou L., Bakolas A., Tasis D., Parthenios J., Krontiras C., Georga S., Galiotis C., Papagelis K., Materials, 13(19):art.no. 4308 (2020).
• “Visible laser scribing fabrication of porous graphitic carbon electrodes: morphologies, electrochemical properties, and applications as disposable sensor platforms“, by Vaughan E., Larrigy C., Burke M., Sygellou L., Quinn A.J., Galiotis C., Iacopino D., ACS Applied Electronic materials, 2(10):3279-3288 2020).
• “Tunable macroscale structural superlubricity in two-layer graphene via strain engineering“, by Androulidakis C., Koukaras E.N., Paterakis G., Trakakis G., Galiotis C., Nature Communications, 11(1):art. no 1595 (2020)
• “2020 Roadmap on Carbon Materials for Energy Storage and Conversion“, by Wu, M., Liao, J., Yu, L., (…), Galiotis, C., Ma, J., Chemistry – An Asian Journal
  15(7):995-1013 (2020)
• “Thermal properties enhancement of epoxy resins by incorporating polybenzimidazole nanofibers filled with graphene and carbon nanotubes as reinforcing material“, by Datsyuk V., Trotsenko S., Trakakis G., (…), Reich S., Papagelis K., Polymer Testing, 82: art. no. 106317 (2020)
• “Production and processing of graphene and related materials“, by Backes, C., Abdelkader, A.M., Alonso, C., (…), Ferrari, A.C., Garcia-Hernandez, M., 2D Materials, 7(2):art. no. 022001 (2020)
• “Fabrication and Electrochemical Properties of Three-Dimensional (3D) Porous Graphitic and Graphenelike Electrodes Obtained by Low-Cost Direct Laser Writing Methods” by Burke M., Larrigy C., Vaughan E., (…), Galiotis C., Iacopino D., ACS Omega, 5 (3): 1540-1548 (2020)
• “Graphene and related materials in hierarchical fiber composites: Production techniques and key industrial benefits“, by Valorosi F., De Meo E., Blanco-Varela T., (…), Young R.J., Palermo V., Composites Science and Technology, 185: art. no. 107848 (2020)
• “Improving the damping behavior of fiber-reinforced polymer composites with embedded superelastic shape memory alloys (SMA)“, by Katsiropoulos C.V., Pappas P., Koutroumanis N., Kokkinos A., Galiotis C., Smart Materials and Structures, 29 (2): art. no. 025006 (2020)
• “Development of a reactor for the in situ monitoring of 2D materials growth on liquid metal catalysts, using synchrotron x-ray scattering, Raman spectroscopy, and optical microscopy“, by Saedi M., De Voogd J.M., Sjardin A., (…), Van Baarle G.J.C., Groot I.M.N., Review of Scientific Instruments, 91 (1): art. no. 013907 (2020)
• “Load transfer in high content graphite nanoplateles composites“, by Cilento F., Martone A., Carbone M.G.P., Giordano M., Galiotis C., AIP Conference Proceedings, 2196: art. no. 020043 (2019)
• “Wettability of graphene by molten polymers“, by Pastore Carbone M.G., Tammaro D., Manikas A.C., (…), Di Maio E., Galiotis C., Polymer, 180: art. no. 121708 (2019)
• “Effect of Carbon Support on the Electrocatalytic Properties of Pt?Ru Catalysts“, by Hasa B., Martino E., Vakros J., (…), Galiotis C., Katsaounis A., ChemElectroChem, 6 (19): 4921 (2019)
• “Stress transfer at the nanoscale on graphene ribbons of regular geometry“, by Manikas A.C., Pastore Carbone M.G., Woods C.R., (…), Novoselov K.S., Galiotis C., Nanoscale, 11 (30): 14354-14361 (2019)
• “Stress-transfer from polymer substrates to monolayer and few-layer graphenes“, by Androulidakis C., Sourlantzis D., Koukaras E.N., Manikas, A.C.,
  Galiotis C., Nanoscale Advances, 1 (22): 4972-4980 (2019)
• “Investigation of charges-driven interaction between graphene and different SiO₂ surfaces“, by Pantano M.F., Iacob E., Picciotto A., Margesin B., Centeno A., Zurutuza A., Galiotis C., Pugno N.M., Speranza G., CARBON, 148:336-343 (2019)
• “Sculpturing graphene wrinkle patterns into compliant substrates“, by Sampathkumar K., Androulidakis C., Koukaras E.N., Rahova J., Drogowska K., Kalbac M., Vetushka A., Fejfar A., Galiotis C., Frank O., CARBON, 146: 772-778 (2019)
• “Mosaic pattern formation in exfoliated graphene by mechanical deformation“, by Carbone M.G.P., Manikas A.C., Souli I., Pavlou C., Galiotis C., NATURE COMMUNICATIONS, 10: art. no. 1572 (2019)
• “Benchmarking of graphene-based materials: real commercial products versus ideal graphene“, by Kovtun A., Treossi E., Mirotta N., Scida A., Liscio A., Christian M., Valorosi F., Boschi A., Young R.J., Galiotis C., Kinloch I.A., Morandi V., Palermo V., 2D MATERIALS, 6(2):art. no. 025006 (2019)
• “3-Arm star pyrene-functional PMMAs for efficient exfoliation of graphite in chloroform: Fabrication of graphene-reinforced fibrous veils” by Gkermpoura S.S., Papadimitriou K.D., Skountzos E.N., Polyzos I., Pastore Carbone M.G., Kotrotsos A., Mavrantzas V.G., Galiotis C., Tsitsilianis C., Nanoscale, 11(3):915-931 (2019)
• “Enhancing the adhesion of graphene to polymer substrates by controlled defect formation“, by Anagnostopoulos G., Sygellou L., Paterakis I.G., Polyzos I., Aggelopoulos C.A., Galiotis C., NANOTECHNOLOGY, 30(1): art no 015704 (2019)
• “Controllable, eco-friendly, synthesis of highly crystalline 2D-MoS₂ and clarification of the role of growth-induced strain“, by Michail A., Parthenios J., Anestopoulos D., Galiotis C., Christian M., Ortolani L., Morandi V., Papagelis K., 2D MATERIALS, 5(3): art no 035035 (2018)
• “Characterization of Graphene Flexible Materials and Displays“, by Anagnostopoulos G., Parthenios J., Galiotis C., in Flexible Carbon-Based Electronics, edit. by P. Samori, V. Palermo, X. Feng (Series Editor), ch. 7, pg. 207-222, published by Wiley, VCH, (2018)
• “Strain Engineering in Highly Wrinkled CVD Graphene/Epoxy Systems“, by Anagnostopoulos G., Paterakis G., Polyzos I., Pappas P.N., Kouroupis-Agalou K., Mirotta N., Scida A., Palermo V., Parthenios J., Papagelis K., ACS APPLIED MATERIALS & INTERFACES, 10(49): 43192-43202 (2018)
• “Non-Eulerian behavior of graphitic materials under compression“, by Androulidakis C., Koukaras E.N., Hadjinicolaou M., Galiotis C., CARBON, 138: 227-233 (2018)
• “A mechanical system for tensile testing of supported films at the nanoscale“, by Pantano M.F., Speranza G., Galiotis C., Pugno N., NANOTECHNOLOGY, 29(39): art no 395707 (2018)
• “Controllable, eco-friendly, synthesis of highly crystalline 2D-MoS2 and clarification of the role of growth-induced strain“, by Michail A., Parthenios J., Anestopoulos D., Galiotis C., Christian M., Ortolani L., Morandi V., Papagelis K., 2D MATERIALS, 5(3): art no 035035 (2018)
• “Strained hexagonal boron nitride: Phonon shift and Gruneisen parameter“, by Androulidakis C., Koukaras E.N., Poss M., Papagelis K., Galiotis C., Tawfick S., Physical Review B, 97(24): art no 241414 (2018)
• “Compressive response and buckling of graphene nanoribbons“, by Sgouros A.P., Kalosakas G., Papagelis K., Galiotis C., SCIENTIFIC REPORTS, 8: art no 9593 (2018)
• “A novel mild method for surface treatment of carbon fibres in epoxy-matrix composites“, by Koutroumanis N., Manikas A.C., Pappas P.N., Petropoulos F., Sygellou L., Tasis D., Papagelis K., Anagnostopoulos G., Galiotis C., Composites Science and Technology, 157:178-184 (2018)
• “An Evaluation of Graphene as a Multi-Functional Heating Element for Biomedical Applications“, by Anagnostopoulos G., Treossi E., Parthenios J., Papagelis K., Palermo V., Galiotis C., Journal of Biomedical Nanotechnology, 14 (1): 86-97 (2018)
• “Tailoring viscoelastic response, self-heating and deicing properties of carbon-fiber reinforced epoxy composites by graphene modification“, by Zanjani J.S.M., Okan B.S., Pappas P.N., Galiotis C., Menceloglu Y.Z., Yildiz M., Composites Part A – Applied Science and Manufacturing, 106: 1-10 (2018)
• “Evaluating arbitrary strain configurations and doping in graphene with Raman spectroscopy“, by Mueller N.S., Heeg S., Alvarez M.P., Kusch P., Wasserroth S., Clark N., Schedin F., Parthenios J., Papagelis K., Galiotis C., Kalbac M., Vijayaraghavan A., Huebner U., Gorbachev R., Frank O., Reich S., 2D MATERIALS, 5(1): art. no. 015016 (2018)
• “Wrinkling formation in simply-supported graphenes under tension and compression loadings“, by Androulidakis C., Koukaras E.N., Carbone M.G.P., Hadjinicolaou M., Galiotis C., NANOSCALE, 9(46): 18180-18188 (2017)
• “Atomistic potential for graphene and other sp² carbon systems” by Fthenakis Z.G., Kalosakas G., Chatzidakis G.D., Galiotis C., Papagelis K., Lathiotakis N.N., Physical Chemistry Chemical Physics, 19(45): 30925-30932 (2017).
• “Graphene: A new activator of sodium persulfate for the advanced oxidation of parabens in water“, by Bekris L., Frontistis Z., Trakakis G., Sygellou L., Galiotis C., Mantzavinos D., Water Research, 126:111-121 (2017).
• “Wrinkled Few-Layer Graphene as Highly Efficient Load Bearer“, by Androulidakis C., Koukara, E.N., Rahov, J., Sampathkuma, K., Parthenios J., Papagelis K., Frank O., Galiotis C., ACS Applied Materials and Interfaces, 9(31):26593-26601 (2017).
• “Graphene aerogels: a review” by Gorgolis G., Galiotis C., 2D Materials, 4(3): art.no:032001 (2017)
• “Compression behavior of simply-supported and fully embedded monolayer graphene: theory and experiment” by Koukaras E.N., Androulidakis C., Anagnostopoulos G., Papagelis K., Galiotis C., Extreme Mechanics Letters, 8:191-200 (2016)
• “Stress and charge transfer in uniaxially strained CVD graphene” by: Milan Bousa, George Anagnostopoulos, Elena del Corro, Karolina Drogowska, Jan Pekarek,Ladislav Kavan,Martin Kalbac,John Parthenios, Konstantinos Papagelis, Costas Galiotis, Otakar Frank, Physica Status Solidy (B) Basic Research, 253(12): 2355-2361 (2016)
• “Mechanical stability of flexible graphene-based displays“, by Anagnostopoulos G., Pappas P.-N., Li Z., Kinloch I.A., Young R.J., Novoselov K.S., Lu C.Y., Pugno N., Parthenios J., Galiotis C., Papagelis K.,
  ACS APPLIED MATERIALS & INTERFACES, 8(34):22605-22614 (2016)
• “Curvature-dependent surface energy for free-standing monolayer graphene” by Sfyris, D.; Galiotis, C.,
  MATHEMATICS AND MECHANICS OF SOLIDS, 21(7):812-825 (2016)
• “Uniaxial compression of suspended single and multilayer graphenes” by Sgouros A.P., Kalosakas G., Galiotis C., Papagelis K.,
  2D MATERIALS, 3 (2): art. no. 025033 (2016)
• “Electrochemically exfoliated graphene/PEDOT composite films as efficient Pt-free counter electrode for dye-sensitized solar cells” by M. Belekoukia, M.S. Ramasamy, S. Madeshwaran, S. Yang, X.L. Feng, G. Paterakis, V. Dracopoulos, C.G. Galiotis, P. Lianos, ELECTROCHIMICA ACTA, 194:110-115 (2016)
• “Optical detection of strain and doping inhomogeneities in single layer MoS₂“, by A. Michail, N. Delikoukos, J. Parthenios, C.G. Galiotis, K. Papagelis, Applied Physics Letters, 108 (17): art. no. 173102
  (2016)
• “Molecular modeling combined with advanced chemistry for the rational design of efficient graphene dispersing agents“, by K.D. Papadimitriou, E.N. Skountzos, S.S. Gkermpoura, I. Polyzos, V.G. Mavrantzas, C. Galiotis, C. Tsitsilianis, ACS Macro Letters, 5 (1):24-29 (2016)
• “Work function tuning of reduced graphene oxide thin films“, by L. Sygellou, G. Paterakis, C. Galiotis, D. Tasis,
  Journal of Physical Chemistry C, 120 (1):281-290 (2016)
• “Phenomenological multiscale finite element for single layer graphene“, by T.C. Theodosiou, C.G. Galiotis, D.A. Saravanos, Computational Materials Science, 115:125-136 (2016)
• “Graphene flakes under controlled biaxial deformation“, by C. Androulidakis, E.N. Koukaras, J. Parthenios, G. Kalosakas, K. Papagelis, C. Galiotis,
  Scientific Reports, 5: art. no. 18219 (2015)
• “Epoxidized multi-walled carbon nanotube buckypapers: A scaffold for polymer nanocomposites with enhanced mechanical properties“, by G. Trakakis, G. Anagnostopoulos, L. Sygellou, A. Bakolas, J. Parthenios, D. Tasis, C. Galiotis C., K. Papagelis, CHEMICAL ENGINEERING JOURNAL, 281:793-803 (2015)
• “Oxidation resistance of aligned carbon nanotube-reinforced silicon carbide composites“, by H. Mei, Qianglai B., K. Dassios , T.M. Ji, S.S. Xiao, H.Q. Li, L.F. Cheng, C. Galiotis, CERAMICS INTERNATIONAL, 41 Part b (9):12495-12498 (2015)
• “Graphene resting on substrate: Closed form solutions for the perfect bonding and the delamination case“, by D. Sfyris, C. Androulidakis, C. Galiotis, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 71:219-232 (2015)
• “Phonon properties of graphene derived from molecular dynamics simulations” by E. Koukaras, G. Kalosakas, C. Galiotis, K. Papagelis, SCIENTIFIC REPORTS, 5: art. no.12923 (2015)
• “Graphene as a hexagonal 2-lattice: Evaluation of the in-plane material constants for the linear theory. A multiscale approach“, by D. Sfyris, E.N. Koukaras, N. Pugno, C. Galiotis., JOURNAL OF APPLIED PHYSICS, 118 (7): art.no.075301 (2015)
• “Embedded trilayer graphene flakes under tensile and compressive loading“, by G. Tsoukleri, J. Parthenios, C. Galiotis , K. Papagelis , 2D MATERIALS, 2 (2):art. no. 024009 (2015)
• “Colloidal stabilization of graphene sheets by ionizable amphiphilic block copolymers in various media“, by M.-T. Popescu, D. Tasis, K. D. Papadimitriou, S. Gkermpoura, C. Galiotis, C. Tsitsilianis, CRSC Advances, 5(109):89447-89460 (2015)
• “Graphene Mechanics: Current Status and Perspectives“, by C. Galiotis, O. Frank, E. Koukaras, D. Sfyris, ANNUAL REVIEW OF CHEMICAL AND BIOMOLECULAR ENGINEERING, 6:121-140 (2015)
• “Suspended monolayer graphene under true uniaxial deformation“, by I. Polyzos, M. Bianchi, L. Rizzi, E.N. Koukaras, J. Parthenios, K. Papagelis, R. Sordan, C. Galiotis, NANOSCALE, 7 (30):13033-13042 (2015)
• “Effect of the reduction process on the field emission performance of reduced graphene oxide cathodes“, by L. Sygellou, G. Viskadouros, C. Petridis, E. Kymakis, C. Galiotis, D. Tasis, E. Stratakis, RSC ADVANCES, 5 (66): 53604-53610 (2015)
• “Constitutive modeling of some 2D crystals: Graphene, hexagonal BN, MoS₂, WSe₂ and NbSe₂“, by D. Sfyris, G.I. Sfyris, C. Galiotis, International Journal of Solids and Structures, 66: 98-110 (2015)
• “Deformation of Wrinkled Graphene” by: Z.L. Li, I.A. Kinloch, R.J. Young, K.S. Novoselov, G. Anagnostopoulos, J. Parthenios, C. Galiotis, K. Papagelis, C.Y. Lu, L. Britnell, ACS NANO, 9(4): 3917-3925 (2015)
• “Stress transfer mechanisms at the submicron level for graphene/polymer systems“ by G. Anagnostopoulos, C. Androulidakis, E.N. Koukaras, G. Tsoukleri, I. Polyzos, J. Parthenios, K. Papagelis, C. Galiotis, ACS Applied Materials and Interfaces, 7 (7): 4216-4223 (2015)
• “Nonlinear subharmonic oscillation of orthotropic graphene-matrix composite“ by E. Jomehzadeh, A.R. Saidi, Z. Jomehzadeh , F. Bonaccorso , V. Palermo , C. Galiotis , N.M. Pugno, Carbon Computational Materials Science, 99: 164-172 (2015)
• “Science and technology roadmap for graphene, related two-dimensional crystals, and hybrid systems“ by A. C. Ferrari, F.Bonaccorso, V. Falko, K. S. Novoselov, S. Roche, P. Boggild, S. Borini, F. Koppens, V. Palermo, N.Pugno, J.A. Garrido, R. Sordan, A. Bianco, L. Ballerini, M. Prato, E. Lidorikis, J. Kivioja, C. Marinelli, T.Ryhanen, A.Morpurgo, J. N. Coleman, V. Nicolosi, L. Colombo, A. Fert, M. Garcia-Hernandez, A. Bachtold, G.F.Schneider, F. Guinea, C.Dekker, M. Barbone, C. Galiotis, A. Grigorenko, G. Konstantatos, A. Kis, M.Katsnelson, C. W. J. Beenakker, L.Vandersypen, A. Loiseau, V. Morandi, D. Neumaier, E. Treossi, V.Pellegrini, M. Polini, A. Tredicucci, G. M. Williams, B. H. Hong, J. H. Ahn, J. M. Kim, H. Zirath, B. J. van Wees, H. van der Zant, L. Occhipinti, A. Di Matteo, I. A. Kinloch, T. Seyller, E. Quesnel, X. Feng, K. Teo, Nanoscale, 7 (11):4598-4810 (2015).
• “Experimentally derived axial stress-strain relations for two-dimensional materials such as
  monolayer graphene” by Ch.Androulidakis, G.Tsoukleri, N.Koutroumanis, G.Gkikas, P.Pappas,
  J.Parthenios, K.Papagelis, C. Galiotis, Carbon, 81:322-328 (2015).
• “Morphological and microstructural property comparison of bulk and aligned CVD-grown carbon nanotubes“, by Mei, H., Bai, Q., Dassios, K., Li, H., Cheng, L., Galiotis, C., Advanced Composites Letters, 23 (1): 5-10 (2014)
• “Curvature dependent surface energy for free standing monolayer graphene: Geometrical and
  material linearization with closed form solutions” by D. Sfyris, G.I. Sfyris, C. Galiotis,
  International Journal of Engineering Science, 85:224-233 (2014)
• “Curvature dependent surface energy for a free standing monolayer graphene: Some closed
  form solutions of the non-linear theory” by D.Sfyris, G.I.Sfyris, C.Galiotis, International
  Journal of Non-Linear Mechanics, 67:186-197 (2014) .
• “Failure Processes in Embedded Monolayer Graphene under Axial Compression” by Androulidakis C., Koukaras E.N., Frank O., Tsoukleri G., Sfyris D., Parthenios J., Pugno N., Papagelis K., Novoselov K. S., Galiotis C., SCIENTIFIC REPORTS, 4: 5271 (2014)
• “Improved power conversion efficiency by insertion of RGO-TiO₂ composite layer as optical spacer in polymer bulk heterojunction solar cells” by Sharma, GD , Keshtov, ML , Khokhlov, AR , Tasis, D , Galiotis, C , ORGANIC ELECTRONICS, 15(2): 348-355 (2014)
• “Study of the thermal reduction of graphene oxide and of its application as electrocatalyst in quasi-solid state dye-sensitized solarcells in combination with PEDOT” by Nikolakopoulou, A., Tasis, D., Sygellou, L., Dracopoulos, V., Galiotis, C., Lianos, P., Electrochimica Acta, 111:698-706 (2013)
• “Nonlinear softening and hardening nonlocal bending stiffness of an initially curved monolayer grapheme” by Jomehzadeh, E, Afshar, MK, Galiotis, C, Shi, X , Pugno, NM, INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS, 56(SI): 123-131 (2013)
• “Assessing micromechanical behaviour of PET cords in rubber matrix composites by laser Raman microscopy” by Pastore Carbone, MG, Parthenios, J, Tsoukleri, G, Cotugno, S, Mensitieri, G, Galiotis, C, COMPOSITES SCIENCE AND TECHNOLOGY , 85:104-110 (2013)
• “Raman spectroscopy of graphene at high pressure: Effects of the substrate and the pressure transmitting media” by Filintoglou, K , Papadopoulos, N, Arvanitidis, J, Christofilos, D, Frank, O, Kalbac, M, Parthenios, J, Kalosakas, G, Galiotis, C, Papagelis, K, PHYSICAL REVIEW B, 88(4): art. no 045418 (2013)
• “Structural Properties of Chemically Functionalized Carbon Nanotube Thin Films” by Trakakis, G, Tasis, D , Parthenios, J , Galiotis, C , Papagelis, K, MATERIALS, 6(6):2360-2371 (2013)
• “In-plane force fields and elastic properties of graphene” by Kalosakas, G, Lathiotakis, NN, Galiotis, C, Papagelis, K, JOURNAL OF APPLIED PHYSICS, 113(13): 134307 (2013)
• “Open structured in comparison with dense multi-walled carbon nanotube buckypapers and their composites” Trakakis, G , Tasis, D , Aggelopoulos, C , Parthenios, J ,Galiotis, C , Papagelis, K, COMPOSITES SCIENCE AND TECHNOLOGY, 77: 52-59 (2013)
• “Efficient exfoliation of graphene sheets in binary solvents”
  by Tasis, D , Papagelis, K , Spiliopoulos, P , Galiotis, C, MATERIALS LETTERS, 94: 47-50 (2013)
• “Graphene production by dissociation of camphor molecules on nickel substrate” by Ravani, F , Papagelis, K , Dracopoulos, V , Parthenios, J , Dassios, KG; Siokou, A , Galiotis, C, THIN SOLID FILMS, 527: (2013)
• “Buckypaper as Pt-free cathode electrode in photoactivated fuel cells” by Sfaelou, S.; Antoniadou, M.; Trakakis, G.; Dracopoulos, V.; Tasis, D.; Parthenios, J.; Galiotis, C.; Papagelis, K.; Lianos, P., ELECTROCHIMICA ACTA 80: 399-404 (2012)
• “Polymer-nanotube interaction in MWCNT/poly(vinyl alcohol) composite mats” by Dassios, Konstantinos G.; Galiotis, Costas, CARBON Volume: 50 (11): 4291-4294 (2012)
• “Compressive behavior of MWCNT/epoxy composite mats” by Dassios Konstantinos G.; Musso Simone; Galiotis Costas, COMPOSITES SCIENCE AND TECHNOLOGY 72(9): 1027-1033 (2012).
• “Phonon and Structural Changes in Deformed Bernal Stacked Bilayer Graphene” by Frank Otakar; Bousa Milan; Riaz Ibtsam; et al., NANO LETTERS 12(2): 687-693 (2012).
• “Surface refinement and electronic properties of graphene layers grown on copper substrate: An XPS, UPS and EELS study” by Siokou A.; Ravani F.; Karakalos S.; Frank, O; Kalbac, M; Galiotis, C; Applied Surface Science 257(23): 9785-9790 (2011).
• “Electrochemical oxidation of multi-wall carbon nanotubes” by Moraitis Giorgos; Spitalsky Zdeno; Ravani Fotini; Siokou A; Galiotis C; Carbon 49(8): 2702-2708 (2011).
• “Development of a universal stress sensor for graphene and carbon fibres” by Frank Otakar; Tsoukleri Georgia; Riaz Ibtsam; Papagelis, K; Parthenios, J; Ferrari, AC; Geim, AK; Novoselov, KS; Galiotis, C; Nature Communications 2 art. no. 255 (2011).
• “Raman 2D-Band Splitting in Graphene: Theory and Experiment” by Frank Otakar; Mohr Marcel; Maultzsch Janina; Thomsen, C; Riaz, I; Jalil, R; Novoselov, KS; Tsoukleri, G; Parthenios, J; Papagelis, K; Kavan, L; Galiotis, C; ACS NANO 5(3): 2231-2239 (2011).
• “Nanostructured Heteroarm Star Block Terpolymers via an Extension of the “In-Out” Polymerization Route” by Linardatos George; Tsoukleri Georgia; Parthenios John; Galiotis, C; Monticelli, O; Russo, S; Tsitsilianis, C, Macromolecular Rapid Communications 32 (4): 371-377 (2011).
• “High-pressure Raman study of stacked-cup carbon nanofibers” by Papagelis K.; Arvanitidis J.; Christofilos D.; Souliou, SM Galiotis, C; Ves, S; Kourouklis, GA, High Pressure Research 31 (1): 131-135 art. no. PII 933539173 (2011).
• “Compression Behavior of Single-Layer Graphenes” by Frank Otakar; Tsoukleri Georgia; Parthenios John; Papagelis, K ; Riaz, I; Jalil, R; Novoselov, KS; Galiotis, C, ACS NANO 4 (6): 3131-3138 (2010).
• “DIELECTRIC SPECTROSCOPY AND TUNABILITY OF MULTI-WALLED CARBON NANOTUBE/EPOXY RESIN COMPOSITES” by Spitalsky Z.; Georga S. N.; Krontiras C. A.; Galiotis C.; Advanced Composites Letters 19 (6): 193-203 (2010).
• “Development and Testing of a self-deformed Composite Material” by G. Trakakis and C. Galiotis, Composite Structures, 92 (2): 306-311 (2010).
• “Carbon Nanotube-Polymer Composites: Chemistry, Processing, Mechanical and Electrical Properties” by Zdenko Spitalsky, Dimitrios Tasis, Konstantinos Papagelis, Costas Galiotis, Progress in Polymer Science, 35 (3): 357-401 (2010).
• “Subjecting a Graphene Monolayer to Tension and Compression” by Georgia Tsoukleri, John Parthenios, Konstantinos Papagelis, Rashid Jalil, Andrea C. Ferrari, Andre K. Geim, Kostya S. Novoselov, and Costas Galiotis, Small, 5 (21): 2397-2402 (2009).
• “High volume fraction carbon nanotube-epoxy composites” by Spitalsky, Z, Tsoukleri, G, Tasis, D, Krontiras, C, Georga, SN, Galiotis, C, Nanotechnology, 20 Art. No. 405702 405-702 (2009).
• “Effect of oxidation treatment of multiwalled carbon nanotubes on the mechanical and electrical properties of their epoxy composites” by Spitalsky Z, Krontiras CA, Georga SN, Galiotis C, Composites Part A-Applied, 40 (6-7): 778-783 (2009).
• “Uniaxial strain in graphene by Raman spectroscopy: G peak splitting, Gruneisen parameters, and sample orientation” by Mohiuddin TMG, Lombardo A, Nair RR, Bonetti, A., Savini G, Jalil R, Bonini N, Basko DM, Galiotis, C., Marzari N, Novoselov KS, Geim AK, Ferrari AC, Physical Review B, 79 (20): Art No. 205433 (2009).
• “Effect of fatigue on the interface integrity of unidirectional C-f-reinforced epoxy resin composites” by Koimtzoglou C, Dassios KG, Galiotis C, Acta Materialia, 57 (9): 2800-2811 (2009).
• “Single-walled carbon nanotubes decorated with a pyrene-fluorenevinylene conjugate” by Tasis D, Mikroyannidis J, Karoutsos V, Galiotis, C., Papagelis K, Nanotechnology, 20: Art 13 (2009).
• “Matrix cracking in polymeric composites laminates: Modelling and experiments” by D.T.G. Katerelos, M. Kashtalyan, C. Soutis, C. Galiotis, Composites Science and Technology, 68 (12): 2310 – 2317 (2008).
• “Energy criterion for modelling damage evolution in cross-ply composite laminates” by D.T.G. Katerelos, J. Varna, C. Galiotis, Composites Science and Technology, 68 (12): 2318-2324 (2008).
• “Chemical Oxidation of Multi Walled Carbon Nanotubes” by V. Datsyuk, M. Kalyva, K. Papagelis, J. Parthenios, D. Tasis, A. Siokou, I. Kallitsis and C. Galiotis, Carbon, 46 (6): (833-840) (2008).
• “Accelerated environmental ageing study of polyester/glass fiber reinforced composites (GFRPCs)” by D. E. Mouzakis, H. Zoga and C. Galiotis, Composites Part B: Engineering, 39 (3): 467 – 475 (2008).
• “Thermal stress development in fibrous composites” by G. Anagnostopoulos, J. Parthenios and C. Galiotis, Materials Letters, 62 (3): 341-345 (2008).
• “Oxidized Multi-Walled Carbon Nanotube Film Fabrication and Characterization” by D. Kastanis, D. Tasis, K. Papagelis, J. Parthenios, C. Tsakiroglou, C. Galiotis, Advanced Composites Letters, 16 (6): 243-248 (2007).
• “Covalently functionalized carbon nanotubes as macroinitiators for radical polymerization” by K. Papagelis, M. Kalyva, D. Tasis, I. Parthenios, A. Siokou, C. Galiotis, Physica Status Solidi B-Basic Solid State Physics,  244 (11): 4046-4050 (2007).
• “High pressure Raman study of the second-order vibrational modes of single- and double-walled carbon nanotubes” by K. Papagelis, K.S. Andrikopoulos, J. Arvanifidis, A. Christofilos, C. Galiotis, T. Takenobu, Y. Iwasa, H. Kataura, S. Ves, G.A. Kourouklis, Physica Status Solidi B-Basic State Physics, 244 (11): 4069-4073 (2007).
• “Growth of calcium carbonate on non-covalently modified carbon nanotubes” by D. Tasis, S. Pispas, C. Galiotis and N. Bouropoulos, Materials Letters, 61 (28): 5044-5046 (2007).
• “Water-solube carbon nanotubes by redox radical polymerization” by Tassis D., K. Papagelis M. Prato, I. Kallitsis and C. Galiotis, Macromolecular Rapid Communications, 28 (15): 1553-1558 (2007).
• “Transformation fatique and stress relaxation of shape memory alloy wires“ by P. Pappas, D. Bollas, J. Parthenios, V. Dracopoulos and C. Galiotis, Smart Mater. Struct. 16 (6): 2560-2570 (2007).
• “Analysis of matrix cracking in GFRP laminates using Raman spectroscopy” by D.T.G. Katerelos, P. Lundmark, J. Varna and C. Galiotis, Composites Science and Technology, 67 (9): 1946-1954 (2007).
• “Stress generation by shape memory alloy wires embedded in polymer composites” by D. Bollas, P. Pappas, J. Parthenios and C. Galiotis, Acta materialia, 55 (16): 5489-5499 (2007).
• “Phonon stress sensitivity for interface characterization of fibrous composites at various temperatures” by G. Anagnostopoulos, J. Parthenios and C. Galiotis, Acta Materialia, 55 (11): 3783-3793 (2007).
• “Quantifying crystalline fraction within polymer spherulites” by K. Gatos, C. Minogianni and C. Galiotis, Macromolecules, 40: 786-789 (2007).
• “Raman spectroscopy investigation of stiffness change and residual strains due to matrix cracking” by D.G. Katerelos, P. Lundmark, J. Varna and C. Galiotis., Mechanics of Composite Materials, 42 (6): 535-546 (2006).
• “Viscoplastic finite element analysis of matrix crack propagation in model continuous-carbon fibre/epoxy composites” by S. Sirivedin, D.N. Fenner, R.B. Nath and C. Galiotis,  Composites Part A: Applied Science and Manufacturing,  37 (11): 1922-1935 (2006).
• “Effects of inter-fibre spacing and matrix cracks on stress amplification factors in carbon-fibre/epoxy matrix composites, Part II: Hexagonal array of fibres” by D.N. Fenner, R.B. Nath and C. Galiotis,  Composites Part A: Applied Science and Manufacturing, 37 (11): 1936-1943 (2006).
• “Growth of calcium phosphate mineral on carbon nanotube buckypapers” by D. Tasis, D. Kastanis, C. Galiotis, and N. Bouropoulos, Phys. Stat. Sol. (b), 243 (13): 3230-3233 (2006).
• “Effect of Off – Axis Matrix Cracking on Stiffness of Symmetric Angle-Ply Composite Laminates” by D.G. Katerelos, L.N. McCartney and C. Galiotis, International Journal of Fracture, 139: 529-536 (2006).
• “Direct measurement of fiber bridging in notched glass-ceramic-matrix composites” by K.G. Dassios and C. Galiotis,  Journal of Materials Research, 21 (5): 1150-1160 (2006).
• “Effect of Stress and Temperature on the Optical Phonons of Aramid Fibers” by D. Bollas, J. Parthenios and C. Galiotis, Physical Review B, 73: 094103 (2006).
• “Enhancing the Damping of Wind turbine Rotor Blades, the DAMBLADE Project” by P.K. Chaviaropoulos, E.S. Politis, D.J. Lekou, N.N. Sorensen, M.H. Hansen, B.H. Bulder, D. Winkelaar, C. Lindenburg, D.A. Saravanos, T.P. Philippidis, C. Galiotis, M.O.L. Hansen and T. Kossivas, Wind Energy, 9: 163-177 (2006).
• “Design and construction of a vehicular bridge made of glass/polyester pultruded box beams“, by V. Kostopoulos, Y.P. Markopoulos, D.E. Vlachos, D. Katerelos, C. Galiotis, T. Tsiknias, D. Zacharopoulos, D. Karalekas, P. Chronis, D. Kalomallos,  Plastics Rubber and Composites,  34 (4): 201-207 (2005).
• “Global method for measuring stress in polymer fibers at elevated temperatures” by G. Anagnostopoulos, A.G. Andreopoulos, J. Parthenios, C. Galiotis, Applied Physics Letts, 87 (13): 131910-2 (2005).
• “Experimental Determination of Stress Concentrations in Composite Laminates and their Effects on Damage Evolution” by D.G. Katerelos and C. Galiotis, Applied Mechanics and Materials, 5-6: 383-390 (2005).
• “Estimation of crystallinity in isotropic isotactic polypropylene with Raman spectroscopy” by C. Minogianni, K.G. Gatos, C. Galiotis, Applied Spectroscopy, 59 (9): 1141-1147 (2005).
• “An experimental and theoretical study of the stress transfer problem in fibrous composites“,  by G. Anagnostopoulos, J. Parthenios, A.G. Andreopoulos  and C. Galiotis, Acta Materialia, 53 (15): 4173-4183 (2005).
• “Local strain re-distribution and stiffness degradation in cross-ply polymer composites under tension” by D.G. Katerelos, L.N. McCartney and C. Galiotis, Acta Materialia, 53 (12): 3335-3343 (2005).
• “Determination of interface integrity in high volume fraction polymer composites at all strain levels” by G. Anagnostopoulos, D. Bollas, J. Parthenios, G.C. Psarras and C. Galiotis, Acta Materialia, 53 (3): 647-657 (2005).
• “Axial strain redistribution resulting from off-axis ply cracking in polymer composites” by Dionisis G. Katerelos and C. Galiotis, Applied Physics Letters, 85 (17): 3752-3754 (2004).
• “Fluorescence Studies of Polycrystalline Al2O3 Composite Constituents: Piezo-Spectroscopic Calibration and Applications” by Konstantinos G. Dassios and C. Galiotis, Applied Physics A79: 647-659 (2004).
• “Mechanically and thermally induced chain conformational transformations between helical form I and trans-planar form III in syndiotactic polypropylene using FT-IR and Raman spectroscopic techniques” by K.G. Gatos, G. Kandilioti, C. Galiotis, V.G. Gregoriou, Polymer, 45 (13): 4453-4464 (2004).
• “Compressive failure mechanisms in multi-fibre microcomposites” by S. Goutianos, C. Galiotis, T. Peijs,  Composites-Part A, 35 (4): 461-475 (2004).
• “Mechanisms of stress transfer and interface integrity in carbon/epoxy composites under compression loading. Part II: Numerical approach” by S. Goutianos, T. Peijs and C. Galiotis, Int. J. Solids & Structures, 40 (21): 5521-5538 (2003).
• “Stress and temperature self-sensing fibres” by G.C. Psarras, J. Parthenios, D. Bollas and C. Galiotis Chem. Phys. Lett. 367: 270-277 (2003).
• “Effects of inter-fibre spacing and matrix cracks on stress-amplification factors in carbon-fibre/epoxy matrix composites, Part 1: Planar array of fibres” by Sirivedin, S., Fenner, D.N., Nath, R.B. & Galiotis, C., Composites- Part A, 34: 1227-1234 (2003).
• “Direct In Situ Measurements of Bridging Stresses in CFCCs“, by K.G. Dassios, C. Galiotis, V. Kostopoulos and M. Steen, Acta Materialia, 51 (18): 5359-5373 (2003).
• “Stress Transfer Efficiency in Model Composites under Dynamic Loading” by C. Koimtzoglou, V. Kostopoulos and C. Galiotis, Applied Physics-A, 76 (2): 231-239 (2003).
• “Progress in Composites with Embedded Shape Memory Alloy Wires” by J. Schrooten, V. Michaud, J. Parthenios, G.C. Psarras, C. Galiotis, R. Gotthardt, J.A. Manson and J. Van Humbeeck, Materials Transactions (The Japan Institute of Metals), 43 (5): 961-973 (2002).
• “Aramid Fibers; a Multifunctional Sensor for Monitoring Stress/ Strain Fields and Damage Development in Composite Materials” by J. Parthenios, D. G. Katerelos, G.C. Psarras and C. Galiotis, Engineering Fracture Mechanics, 69: 1067-1087 (2002).
• “Mechanisms of stress transfer and interface Integrity in Carbon/ Epoxy Composites under Tension and Compression Loading. Part 1: Experimental Investigation” by S.Goutianos, T. Peijs and C. Galiotis, Int. J. Solids & Structures, 39 (12): 3217-3231 (2002).
• “Comparative Assessment of Stress Transfer Efficience in Tension and Compression” by S. Goutianos , T. Peijs, C. Galiotis, Compos.Part A-Appl. S., 33: 1303-1309 (2002).
• “Adaptive Composites Incorporating Shape Memory Alloy Wires; Part 2: Development of internal recovery stresses as a function of activation temperature” by J. Pathenios, G.C. Psarras and C. Galiotis, Composites-Part A, 32 (12): 1735-1747 (2001).
• “Detailed atomistic molecular-dynamics simulation of the orthorhombic phase of crystalline polyethylene and alkane crystals” by I-E Mavrantzas, D. Prentzas, V.G. Mavrantzas, and C. Galiotis, Journal of Chemical Physics, 115 (8): 3937-3950 (2001).
• “Adptive Composites Incorporating Shape Memory Alloy Wires; Part 1: Probing the internal stress and temperature distributions with a laser Raman sensor”” by G.C. Psarras, J. Pathenios and C. Galiotis, Journal of Materials Science, 36: 535-546 (2001).
• “Modelling the Stress Transfer Efficiency in Carbon/ Epoxy Composites” by A. Paipetis and C. Galiotis, Proc. Royal Soc.-A 457: 1555-1577 (2001).
• “Micromechanics of Reinforcement and Damage Initiation in Carbon Fibre/ Epoxy Composites under Fatigue Loading” by C. Koimtzoglou, V. Kostopoulos and C. Galiotis, Composites Part A, 32: 457-471 (2001).
• “Matrix Crack Propagation Criteria for Model Short Carbon Fibre-Epoxy Composites” by S. Sirivedin, D. N. Fenner, R. B. Nath and C. Galiotis, Composite Science & Technology, 60 (15): 2835-2847 (2000).
• “The progressional approach to interfacial failure in carbon reinforced composites: elasto-plastc finite element modelling of interface cracks” by R. B. Nath, D. N. Fenner and C. Galiotis Composites-Part A, 31: 929-943 (2000).
• “Measurement and Modeling of the Stress Concentration at a Circular Notch in Composite Materials” by B. P. Arjyal, D. G. Katerelos, C. Filiou and C. Galiotis, Journal of Experimental Mechanics, 40 (3): 248-256 (2000).
• “Determination of Molecular Changes in Soft Tissues Under Strain Using Laser Raman Microscopy” by Y-N. Wang, C. Galiotis and D.L. Bader, Journal of Biomechanics, 33: 483-487 (2000).
• “Unification of Fibre/ Matrix Interfacial Measurements with Laser Raman Spectroscopy” by C. Galiotis, A. Paipetis and C. Marston, J. Raman Spectroscopy, 30 (10): 899-912 (1999).
• “In-Situ Monitoring of the Fibre Strain Distribution in Carbon Fibre Thermoplastic Composites Using Laser Raman Spectroscopy; Part 1- Effect of Applied Tensile Stress” by C. Filiou and C. Galiotis, Composites Science & Technology, 59 (14): 2149-2161 (1999).
• “Surface and Bulk Stress/Strain Measurements in Composite Laminates with a Fibre Optic Raman Probe” by B.P. Arjyal, P.A. Tarantili, A.G. Andreopoulos and C. Galiotis, Composites, 30 (10): 1187-1195 (1999).
• “Stress Transfer From the Matrix to the Fibre in a Fragmentation Test: Raman Experiments and Analytical Modeling” by A. Paipetis, Y-C Liu, C. Galiotis and J.A. Nairn, Journal of Composite Materials, 33 (4): 377-399 (1999).
• “On the Failure of Unidirectional Carbon-Epoxy Composites- Part 1: The Effect of Fibre Sizing upon Filament Fracture and Damage Evolution”” by C. Marston and C. Galiotis, Journal of Materials Science, 33: 5311-5325 (1998).
• “Real-Time Micro-Raman Measurements on Stressed Polyethylene Fibres. Part 1- Strain rate effects and molecular stress redistribution” by P.A. Tarantili, A.G. Andreopoulos and C. Galiotis, Macromolecules, 31 (20): 6954-6976 (1998).
• “Residual Strain and Young’s Modulus Determination in Cross-Ply Composites with an Embedded Aramid Fibre Strain Sensor” by B.P. Arjyal, C. Galiotis, S. L. Ogin and R. D. Whattingham, Composites Part A, 29 (11): 1363-1369 (1998).
• “Monitoring Local Strain Magnification in Cross-Ply Composites with an Embedded Aramid Fibre Strain Sensor” by B.P. Arjyal, C. Galiotis, S. L. Ogin and R. D. Whattingham, Journal of Materials Science, 33 (11): 2745-2750 (1998).
• “Definition and Measurement of the Shear-Lag Parameter Beta as an Index of the Stress Transfer Efficiency in Polymer Composites” by C. Galiotis and A. Paipetis, Journal of Materials Science, 33 (5): 1137-1143 (1998).
• “Application of Composites to Civil Engineering Structures; Shear and Bending of Beam-to-Column Composite Sections” by E. Gutierrez, G. Verzeletti and C. Galiotis, Advanced Composites Letters, 6 (2): 47-52 (1997).
• “Raman Vibrational Studies of Atactic and Syndiotactic Polystyrene- Part 2: Use of the ν1 Fundamental Vibrational Mode as a Quantitative Measure of Crystallinity within Isotropic Materials” by E.J.C. Kellar, A. Evans, C. Galiotis and E.H. Andrews, Macromolecules, 30 (8): 2400-2407 (1997).
• “Effects of Interface, Volume Fraction and Geometry upon Stress Re-Distribution in Polymer Composites under Tension” by V. Chohan and C. Galiotis, Composites Science and Technology, 57 (8): 1089-1101(1997).
• “Measurement of Stress Concentration around Fibre Breaks in Carbon/ Epoxy Resin Composite Tows” by C. Marston, B. Gabbitas, J. Adams, S. Nutt, P. Marshall and C. Galiotis, Composite Science and Technology, 57 (8): 913-923 (1997).
• “The Structure and Morphology of Syndiotactic Polystyrene Injection Moulded Coupons” by A.M. Evans, E.J.C. Kellar, J. Knowles, C. Galiotis and E.H. Andrews, Pol. Science & Eng., 37 (1): 153-165 (1997).
• “A Study of the Stress-Transfer Characteristics in Model Composites as a Function of Material Processing, Fibre Sizing and Temperature of the Environment” by A. Paipetis and C. Galiotis, Composite Science and Technology, 57 (8): 827-838 (1997).
• “Fibre-Matrix Mechanical Interaction in Carbon Fibre / Bismaleimide Model Composites” by J.P.Favre, M.H. Auvray, P. CheneauHenry, C. Galiotis, C. Vlattas, A. Paipetis, M. Pegorano, F. Severini, L. DiLandro, L. J. Yuan, Polymer Composites, 17 (6) 937-947 (1996).
• “Failure Characteristics in Carbon Epoxy Composite Tows” by C. Marston, B. Gabbitas, J. Adams, S. Nutt, P. Marshall and C. Galiotis, Composites, 27A (12): 1183-1194 (1996).
• “Measurement of Strain Distribution in Fibre Reinforced Ceramic Matrix Composites” by F. Bollet, C. Galiotis and M. J. Reece, Composites, 27A: 729-735 (1996).
• “Effect of Sizing on the Stress Transfer Characteristics and Interface Failure Modes of Model Carbon Fibre/ Epoxy Composites” by A. Paipetis and C. Galiotis, Composites, 27A: 755-767 (1996).
• “Elasto-Plastic Finite Element Modelling of Interfacial Failure in Model Kevlar 49 Fibre/ Epoxy Composites” by R. B. Nath, D. N. Fenner and C. Galiotis, Composites, 27A: 821-832 (1996).
• “Finite Element Mocdelling of Interfacial Failure in Model Carbon Fibre-Epoxy Composites” by R. B. Nath, D. N. Fenner and C. Galiotis, Journal of Materials Science, 31: 2879-2883 (1996).
• “Stress-Strain Measurements in Advanced Composites Using Remote Laser Raman Microscopy” by B. Ajyal, A. Paipetis and C. Galiotis, Non-Destructive Testing and Evaluation, 12: 355-366 (1996).
• “Characterisation of PAN-based Carbon Fibres with Laser Raman Spectroscopy. Part 1: Effect of Processing Variables on Raman Band Profiles” by N. Melanitis, P.L. Tetlow and C. Galiotis, Journal of Materials Science, 31: 851-860 (1996).
• “Remote Laser Raman Microscopy (ReRaM); Part 1 Design and Testing of a Confocal Microprobe” by A. Paipetis, C. Vlattas and C. Galiotis, Journal of Raman Spectroscopy, 27: 519-526 (1996).
• “Raman Vibrational Studies of Atactic and Syndiotactic Polystyrene- Part 1: Assignment of a conformation/ crystallinity sensitive spectral region” by E.J.C. Kellar, C. Galiotis and E.H. Andrews, Macromolecules, 29: 3515-3520 (1996).
• “Analysis of Stress Transfer from the Matrix to the Fiber Through an Imperfect Interface: Application to Raman data and Single-Fiber Fragmentation Test” by J. Nairn, Y-C Liu and C. Galiotis, ASTM-STP 1290, eds. J. C. Spragg and L. T. Drzal, American Society for Testing and Materials, 47-65 (1996).
• “Interfacial measurements and fracture characteristics of 2D microcomposites using remote laser Raman microscopy” by Chohan, V; Galiotis, C, Composites Part A-Applied Science and Manufacturing, 27(9):881-888 (1996).
• “Localised Stress Measurements in Composite Laminates Using a Raman Stress Sensor” by B. Ajyal, and C. Galiotis, Advanced Composite Letters, 4 (2): 47-52 (1995).
• “Determination of Stress Distribution in Fibre Bridged Cracks in Ceramic Matrix Composites” by F. Bollet, C. Galiotis and M.J. Reece, Advanced Composites Letters, 3 (4): 127-131 (1994).
• “Compressional Behaviour of Carbon Fibres. Part 2: Modulus Softening” by N. Melanitis, P. L. Tetlow, C. Galiotis and S.S. Smith, Journal of Materials Science, 29: 786-799 (1994).
• “Modelling of Stress Transfer in Fibre Composites“ by F. J. Guild, C. Vlattas and C. Galiotis, Composites Science & Technology, 50: 319-332 (1994).
• “Environmental Degradation Studies of the Interface in Single-Filament Graphite/ Epoxy Composites Using Laser Raman Spectroscopy” by M.S. Amer, M.J. Koczak, C. Galiotis, L.S. Schadler, Advanced Composites Letters, 3 (1): 17-20 (1994).
• “Deformation Behaviour of Liquid Crystal Polymer fibres: Part 1. Converting spectroscopic data into mechanical stress-strain curves in tension and compression” by C. Vlattas and C. Galiotis, Polymer, 35 (11): 2335-2347 (1994).
• “Monitoring the Micromechanics of Reinforcement in Carbon fibre/ epoxy resin systems” by N. Melanitis, C. Galiotis, P.L. Tetlow and C.K. L. Davies, Journal of Materials Science, 28: 1648-1654 (1993).
• “Interfacial Shear Stress Distribution in Model Composites; Part 3, The Effect of Fibre Modulus” by N. Melanitis, C. Galiotis, P.L. Tetlow and C.K.L. Davies, Composites, 24: 459-466 (1993).
• “Stress-Transfer Characteristics in Model Composites” by C. Galiotis, Composite Interfaces, 1 (4): 321-336 (1993).
• “A Study of Mechanisms of Stress-Transfer in Continuous and Discontinuous Fibre Model Composites Using Laser Raman Spectroscopy” by C. Galiotis, Composites Science & Technology, 48: 15-28 (1993).
• “Strain Mapping in Aramid/ Epoxy Microcomposites” by K.M. Atallah and C. Galiotis, Composites, 24 (8): 635-642 (1993).
• “Interfacial Micromechanics Using Laser Raman Spectroscopy” by N. Melanitis and C. Galiotis, Proc. of Royal Soc.-A, 440: 379-398 (1993).
• “Residual Stress Distribution in Carbon Fibre/ Thermoplastic Matrix Pre-impregnated Composite Tapes” by C.D. Filiou, C. Galiotis and D.N. Batchelder, Composites, 28 (1): 28-38 (1992).
• “Interfacial Studies on Carbon/ Thermoplastic Model Composites Using Laser Raman Spectroscopy” by L.S. Schadler, N. Melanitis, C. Galiotis, J.C. Figueroa and C. Laird, J. Mater. Sci., 27 (6): 1663-1671 (1992).
• “Interfacial Shear Stress Distribution in Model Composites; Part 2, Fragmentation studies on Carbon Fibre/ Epoxy systems” by N. Melanitis, C. Galiotis, P. L. Tetlow and C. K. L. Davies, Journal of Composite Materials, 26: 574-610 (1992).
• “Phase Transformation around Indentations in Zirconia” by M. J. Reece, P. L. Tetlow and C. Galiotis, Journal Materials Science-Letters, 11: 575-577 (1992).
• “Interfacial Shear Stress Distribution in Model Composites; Part 1, A Kevlar 49 fibre in an Epoxy Matrix“ by H. Jahankhani and C. Galiotis, Journal of Composite Materials, 25: 609-631 (1991).
• “The study of Model Polydiacetylene/ Epoxy Composites; Part 3. The Effect of Volume Fraction” by I. M. Robinson, C. Galiotis, D. N. Batchelder and R. J. Young, Journal of Materials Science, 26 (9): 2293-2299 (1991).
• “Monitoring the  Behaviour of Polymer Fibres under Axial Compression“ by C.  Vlattas and C. Galiotis, Polymer, 32 (10): 1788-1793 (1991).
• “Interfacial Studies on Model Composites Using Laser Raman Spectroscopy“ by C. Galiotis, Composites Science and Technology, 42: 125-150 (1991).
• “Compressional Behaviour of Carbon Fibres: Part 1; A Raman Spectroscopic Study” by N. Melanitis and C. Galiotis, Journal of Materials Science, 25 (12): 5081-5090 (1990).
• “Strain Dependences of the First and Second Order Raman Spectra of Carbon Fibres” by C. Galiotis and D. N. Batchelder, Journal of Materials Science- Letters, 7: 545-547 (1988).
• “Residual Strain Mapping in Carbon Fibre/PEEK Composites“ by C. Galiotis, N. Melanitis, D. N. Batchelder, I. M. Robinson and J. A. Peacock, Composites, 4: 321-324 (1988).
• “Chain Stretching in Aramid Fibres” by S. Van der Zwaag, M. G. Northolt, R. J. Young, I. M. Robinson, C. Galiotis and D. N. Batchelder, Polymer Communications, 28: 276-277 (1987).
• “The Study of Model Polydiacetylene/Epoxy Composites Part 2” by I. M. Robinson, R. J. Young, C. Galiotis and D.N. Batchelder, Journal of Materials Science, 22: 3642-3646 (1987).
• “Strain Dependence of the Raman Frequencies for Different Types of Carbon Fibres“, by I. M. Robinson, M. Zakhikani, R.J. Day, R.J. Young and C. Galiotis, Journal of Materials Science-Letters, 6: 1212-1214 (1987).
• “Stress Induced Twinning of Polydiacetylene Single Crystal Fibres in Composites” by I. M. Robinson, P. H. Yeung, C. Galiotis, R. J. Young and D. N. Batchelder, Journal of Materials Science, 21 3440-3444  (1986).
• “Strain Dependence of the Raman Frequencies of a Kevlar 49 Fibre” by C. Galiotis, I.M. Robinson, R.J. Young, B.J.E. Smith and D.N. Batchelder, Polymer Communications, 26: 354-355 (1985).
• “High Modulus Polydiacetylene Single Crystal Fibres” by C. Galiotis, R.T. Read, P.H.J. Yeung and R.J. Young, Journal of Polymer Science: Polymer Physics Edition, 22: 1589-1606 (1984).
• “The Study of Model Polydiacetylene/Epoxy Composites, Part 1. The Axial Strain in the Fibre” by C. Galiotis, R.J. Young, P.H. Yeung and D.N. Batchelder, Journal of Materials Science, 19: 3640-3648 (1984).
• “A Resonance Raman Spectroscopic Study of the Strength of the Bonding Between an Epoxy Resin and a Polydiacetylene Fibre” by C. Galiotis, R.J. Young and D.N. Batchelder, Journal of Materials Science- Letters, 2: 263-266 (1983).
• “Solid-State Polymerisation and Physical Properties of Bis(ethyl urethane) of  2,4-hexadiyne-1,6-diol, Part III: Mechanical Properties” by C. Galiotis, R. J. Young, Polymer, 24  1023-1030 (1983).
• “Solid-State Polymerisation and Physical Properties of Bis(ethyl urethane) of 2,4-hexadiyne-1,6-diol, Part II: Resonant  Raman Spectroscopy” by C. Galiotis, R. J. Young and D. N. Batchelder, Journal of Polymer Science: Polymer Physics Edition, 21(12): 2483-2494 (1983).
• “Solid-State Polymerisation and Physical Properties of Bis(ethyl urethane) of 2,4-hexadiyne-1,6-diol, Part I: Crystal Modification and Polymerisation Kinetics” by C. Galiotis, R.J. Young, D.J. Ando and D. Bloor, Macromolekulare Chemie, 184: 1083-1095 (1983).